Sangean DDR-22 Specifications download pdf (Page 23)

Setting the alarm times

Your DDR-33 plus radio has two alarms which can each be set to wake

you to DAB, FM radio, iPod or buzzer alarm. The alarms may be set

while the unit is in standby mode or while playing. Each alarm can be

set to sound once, daily, on weekdays or at weekends.

If, when setting the alarm by FM / DAB / iPod source, the final volume

of listening radio is set at “10” or under, then the alarm volume will be

set to start at “10”. However, if when setting the alarm by FM / DAB /

iPod source, the final volume of listening radio is between “10”

and maximum, and then the alarm volume will be set to start in

accordance with the final volume of listening radio. Whatever setting

the alarm by buzzer, the alarm volume will be set to start at the

default value.

Note:

If no buttons are pressed for 5 seconds, your radio will exit the

alarm setup. Also the alarm will sound for 60 minutes.

1. Press the On / Standby button to switch on the radio. If necessary

press and release the Mode button to put the radio into DAB or

FM mode.

2. Press and release the Alarm button. The display will show

“SET ALM”.

3. Press the Select button to enter the alarm setup. “Alarm 1” flashes.

4. Press the Tuning Up or Down buttons to select the desired

alarm number, 1 or 2.

5. Press the Select button to enter the setting for the chosen alarm.

Press the Tuning Up or Down buttons to select ON or OFF. If OFF is

selected any current setting for that alarm will be cancelled.

6. Press the Select button to cause the alarm hour digits to flash on

the display.

7. Press the Tuning Up or Down buttons to choose the desired

alarm hour.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 40 41

No comments

Sangean DDR-22 Specifications Page 23