Sangean RCR-10 (R3) User Manual

RCR-10GBRevision 3

9Controls24. Battery compartment

10GBDisplay iconsRadio controlled time icon (Atomic radio controlled clock icon)PM indicatorTime displaySleep timer iconAlarm 1 iconAlarm 2 iconFreque

11Remote controlBack forwardRepeat one / all / folderTuning upFolder up / preset upFolder down / preset downTuning downMuteSnooze / dimmerToneVolume d

12GBRemote control functionsMany functions of the RCR-10 clock radio can be operated using the remote control. Some operations require a longe

13Using the radio for the rst timeUsing the AC power adaptorThe AC power adaptor required for this unit should be 9 volts AC at 1.4A.Insert the adapt

14GBOperating your radio – Search tuning AM/FM1. Press the Standby button to switch on your radio. 2. Press the Source button as needed until the AM

15Manual tuning – AM/FM1. Press the Standby button to switch on your radio. 2. Press and release the Source button to select AM or FM radio mode. 3. R

16GBSetting up the tuning step increment1. Press and hold the Info/menu button to enter the menu setting when the radio source is in AM/FM mode. 2.

17Display modes – FMYour radio has a range of display options for FM radio mode.1. Repeatedly press and release the Info/menu button to view the RDS

18GBFM stereo (auto) / monoIf the FM radio station being listened to has a weak signal some hiss may be audible. It is possible to reduce this his

1“Made for iPod” means that an electronic accessory has been designed to connect specically to iPod respectively, and has been certied by the develo

19Presetting stations in AM/FM modeThere are 5 preset stations each for AM and FM radio. They are used in the same way for each waveband.1. Press the

20GBiPod dockingYour radio has an iPod docking facility which allows you to play digital audio les and soundtracks held on your iPod directly.Your r

21Charging your iPod1. Place the iPod onto the Universal Dock Adjuster into the iPod docking compartment. Press the STANDBY button to switch on yo

22GBNavigating your iPodTo navigate your iPod menus to make selections or to change settings, you should use your iPod controls. The radio controls ca

23Search function1. Press and release either the Fast-Forward or Back-forward button to start playing the next or previous track.2. While the iPod

24GBClock and AlarmsSetting the time formatThe clock display used in stand-by mode and on the playing mode screens can be set to 12 or 24 hour fo

25Setting the clock time Radio-controlled clockYour RCR-10 has three options to set up its clock time: Radio-control-led clock, FM Radio Data System (

26GBManual settingWhen choosing manual setting as the clock time setting of your radio, the radio-controlled clock and Radio Data System (RDS)

27Radio Data System (RDS)When you set the clock time using the RDS function, your radio will synchronize its clock time whenever it

28GBSetting the alarm clockYour RCR-10 has two alarms which can each be set to wake you to AM/FM radio, buzzer alarm or iPod. The alarms ma

2GBTable of contentsImportant safety instructions ... 3-4Introduction ...

294. Rotate the Tuning control to choose the required alarm type, and then press and release the Tuning control to conrm the setting. The alarm

30GBDisabling / cancelling alarmsTo disable an active alarm, either press and release the Standby button, or press and hold the according alarm button

31Sleep timerYour radio can be set to turn off automatically after a preset time has elapsed. The Sleep Timer setting can be adjusted between 15,

32GBTime zone settingYour RCR-10 can set up the time zone for its radio clock time.1. Press and hold the Info/menu button to enter the menu setting. 2

33Daylight Saving Time1. Press and hold the Info/menu button to enter the menu setting. 2. Rotate the Tuning control until “DST XX” appears on the dis

34GBDisplay & Audio setupDimmer controlThe brightness of the display may be adjusted. If you use the unit in the bedroom, you may prefer a hig

35LoudnessYou can get compensation on lower and higher frequency for your RCR-10 by adjusting the Loudness function.1. Press and hold the Info/me

36GBAuxiliary input socketA 3.5mm stereo Auxiliary Input socket is provided on the rear of your radio to permit an audio signal to be fed into th

37Line out socketThe radio can be used as a separate tuner by connecting the input to Hi-Fi system, or using this input to make recording in stereo fr

38GBIf at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with

3Important Safety Instructions1.2.3.4.5.6.7.8.Read and understand all safety and operating instructions before the radio is operated.Retain instructio

4GB14.15.16.17.18.19.Do not attempt to service the receiver yourself. Removing the cover may expose you to dangerous voltage, and will void the warran

5◎◎◎◎◎◎◎◎◎◎IntroductionThe Sangean RCR-10 FM / AM Digital Tuning Clock Radio provides thefollowing range of features:Radio for AM and FM (with RDS) br

6GBControls1. iPod Universal Dock adjuster2. iPod Dock connector3. Preset 4 / Play / pause 4. Preset 5 / Fast Forward 5. Tuning/Seek/Select control6.

716. LCD display17. Remote control sensor18. SpeakerControls

8GBControls19. FM antenna20. Aux In21. Line Out22. Headphone23. AC in