Sangean WFR-28 Specifications download pdf (Page 77)

Network proles

Each time that you connect your radio to a WiFi network, the radio will store the details of that

connection (SSID, security key, DHCP/IP address settings) as a prole. Up to four such proles

are stored in the radio so that if the unit is used in multiple locations there is no need to enter the

network settings when returning to a location previously visited.

The radios stores the four most recent proles in memory identied by their SSID. Normally the

radio will attempt to connect to one of the stored proles and only if it is unable to do so will you

need to use the Network Wizard.

In the event that you visit a location only once you may wish to delete the prole for the network

in that location to avoid losing other proles.

1. Access the menu for the current mode by pressing the Menu button. Rotate the Tuning Control

Rotary until 'System settings' is highlighted on the display. Press the Tuning Control Rotary

to enter the settings menu.

2. Rotate the Tuning Control Rotary until 'Network' is highlighted on the display. Press the

Tuning Control Rotary to enter the Network settings menu.

3. Rotate the Tuning Control Rotary until 'Network prole' is highlighted on the display. Press

the Tuning Control Rotary to see the stored proles. The prole which is currently in use (if

any) is marked with an asterisk.

4. To remove a prole from memory, rotate the Tuning Control Rotary to highlight the prole to

be deleted and then press the Tuning Control Rotary to conrm the setting.

5. The radio will offer a 'YES' or 'NO' selection. Rotate the Tuning Control Rotary to select 'YES'

and then press the Tuning Control Rotary to conrm the setting. The selected prole will be

deleted.

Note: that it is not possible to delete a prole which is currently in use.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 83

No comments

Sangean WFR-28 Specifications Page 77