Sangean WR-1 Specifications download pdf (Page 10)

Power your radio

AC operation

Before you plug the AC cord into the radio, be sure the AC voltage

is correct. Insert the plug on the end of the supplied power cord

into the AC power socket on the back of the radio.

DC operation

For outdoors use, you can power the radio by using 12V DC input

socket from a DC power supply (example, from the power supply of

vehicles or boats). An AC power adaptor with 1 Ampere and center

positive in polarity can also power the radio in house.

Using the radio for the rst time

1. Place your clock radio on a at surface.

2. Insert the adaptor plug into the AC socket located on the rear of

your radio.

Manual clock setting

1. Press Menu button and the display will show ‘CLOCK SET’.

2. Press the Tuning control knob to enter the clock setting.

3. Rotate the Tuning control knob to select the desired hour and

press the Tuning control knob to conrm the hour setting. Now the

minute digit will ash.

4. Rotate the Tuning control knob to adjust the minutes and press

the knob to conrm the setting. Now the clock setting is completed.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

No comments

Sangean WR-1 Specifications Page 10